Maximo PS-10153D Spo2 Probe for ZOLL E Series Defibrillator
►Brief Introduction
The ZOLL E Series pulse oximetry option enables the user to continuously, noninvasively, and painlessly monitor the percentage of oxygen saturation of arterial hemoglobin at a peripheral measurement site (i.e.foot, toe or finger.) The oximetry sensor contains two light emitting diodes, or LEDs, that transmit red and infrared light through the body’s extremities. A photodetector receives the transmitted light. Oxygen saturated blood absorbs light differently than unsaturated blood. Thus the amount of red and infrared light absorbed by the blood flowing through a suitable peripheral area of the body, such as the finger in adults and the foot in neonates, can be used to calculate the ratio of oxygenated hemoglobin to total hemoglobin in the arterial blood. The monitor displays this ratio as percent SpO2.Normal values typically range from 95% to 100% at sea level. The E Series uses a Maximoâ Pulse Oximetry Circuit Board which features a fundamentally distinct method of acquiring, processing and reporting arterial oxygen saturation and pulse rate. The E Series’ SpO2 module (Maximoâ Circuit Board) connects to the Maximo sensors and reports monitoring results (oxygen saturation, pulse rate, pulse waveform, etc.) via a serial digital interface to the E Series system board. The E Series system provides isolated DC power and serial communication to the SpO2 Board via the Isolated Power Supply Board.
► SpO2 Monitor Test
Test Setup:
1. Connect the universal cable to the MFC test plug.
2. DO NOT connect the ECG cable to the simulator.
3. Connect the Maximo Patient Cable and attach the Maximo sensor to the patient cable.
4. Connect the Maximo sensor to the finger simulation post.
5. Place a fully charged battery into the battery well or connect to ac power (dc power, if equipped).
6. Ensure that the SpO2 Simulator is off.
► Specification
| Operating: | 0° C to 55° C (32° F to 131° F) |
| Storage temperature: | -20° to 60°C (-4° F to 140° F) |
| Humidity: | 5 to 95% relative humidity, non-conden |
► Warranty Guarantee
Under normal conditions, whether our new or used items usually comes with a three-month warranty period. That is to say you are allowed to change or get the machines repaired under guarantee if you find there is any problem about the product you purchased. However, take it easy please. We hope you will be pleased with our products and service down to the ground. Moreover, we have a lot of confidence to satisfy you as our goods are all in perfectly high quality. Years of sales experience makes us handle this sort of issues skillfully. Customers’ satisfaction is the goal that we are always pursuing.
►Warm Tips
In order to avoid causing unnecessary trouble, please read the following carefully.
Please look through all the pictures with patience before placing orders to confirm the product is exactly you want or not as they are also an important part of the product description. What’s more, it is buyer’s responsibility to pay for all the customs fees including all taxes and duties. So it is of great necessity for you to make certain that the equipment you are ordering can be imported in to your country. Once the package leaves our factory, the shipper is not responsible for any delays any more. So please keep it in mind that be sure to check out all the relevant information before placing your orders.
If you have any questions about Maximo PS-10153D Spo2 Probe for ZOLL E Series Defibrillator , please feel free to contact us at any time, we are glad to answer them. Looking forward to receiving your early inquiry.
"Quality assurance" is our eternal pursuit and promise. Don't be hesitant to contact us! Welcome to place your orders.
Product Tags:
|
|
Maximo PS-10153D Spo2 Probe work for ZOLL E Series Defibrillator In Good Working Condition Images
|
